企業產品分類一混合管

  • Luer Lock Adapters 轉接頭

    Luer Lock Adapters 轉接頭

         Expand your capabilities and explore new applications with ConProTec's low-cost Luer Lock Adapters designed for our vast line of STATOMIX Motionless Mixers. The adapters allow easy attachment of dispensing needles for precise application of 2-component adhesives, allowing fine bead control and the ability to apply adhesives in difficult to reach areas. The Luer Lock Adapters easily self-thread onto the stepped end of the mixers. Three adapter sizes are available to fit our line of STATOMIX Motionless Mixers. All three adapters fit all standard needles. 

     靜態攪拌器末端有多種型式設計, 例如: 依所需的流量截取所需的出膠口徑, 裝上轉換頭, 可轉接各種口徑針咀以配合小膠量之要求或軟管.

    Part Number Fits These Mixers
    LA 05-00 (White)
    5mm Mixers
    LA 06-08 (Grey)
    6 and 8mm Mixers
    LA 10-00 (Black)
    10mm Mixers

  • MA卡式混合棒

    50ml膠管使用混合棒,方便操作容易

    MA and MX Static Mixers

    MA and MX Static Mixers

    The STATOMIX MA series mixers feature simple twist-lock mounting. The MA mixers' first element automatically aligns itself precisely with the dividing wall of the MIXPAC 50 cartridge, separating Part A and Part B. As a results of this patented design, the STATOMIX MA mixer prevents curing at the interface of the cartridge. The STATOMIX MA series mixer comes in a wide variety of sizes and will mix virtually any 2-part material including epoxies, silicones, urethanes, acrylics and polyesters. The STATOMIX MA series mixers can also be used for a wide variety of low-pressure meter mix applications.

    靜態混合管

    靜態混合管是應用先進的科學原理同精密的生產技術所製造, 使混合同攪拌二液性材料的工序能夠自動化, 連續化. 擺脫傳統作業方式同解決以往因人手作業所遇到的困難及產品質量問題, 節省工作時間, 提高產品質量. 靜態混合管的攪拌葉片完全根據流體力學設計, 攪拌葉片與外管結構緊湊. 選擇不同的攪拌葉片節數, 可使混合同攪拌達到最佳的效果. 靜態攪拌器末端有多種型式設計, 例如: 依所需的流量截取所需的出膠口徑, 裝上轉換頭, 可轉接各種口徑針咀以配合小膠量之要求或軟管.

    Technical Data
    Outer Housingb 材料-外殼 Polypropylene Elements 材料-螺旋管 Polypropylene (MA) Acetalcopolymere (MX)
    Retaining Method 接合方式 Bayonet style, twist-lock    
    產品規格 單位: mm
    Part No. 貨品編號 Inner Dia. I.D. (mm) 內 徑 Number of Elements 節 數 Outer Dia. O.D. (mm) 外 徑 Length L (mm) 長 度 Nozzle Dia. A (mm) 口 徑 Approx. Content Vol (ml) 容 量
    型號MA適用於比例1:1和2:1 MA Series for Ratios 1:1 & 2:1
    MA 3.0-07-S 3 7 4.6 33.2 1 0.19
    MA 3.0-13-S 3 13 4.6 50.6 1 0.29
    MA 3.0-17-S 3 17 4.6 62.2 1 0.34
    MA 4.0-13-S 4 13 5.8 66 2 0.6
    MA 4.0-17-S 4 17 5.8 81.6 2 0.75
    MA 5.4-07-S 5.4 7 7 55.7 1.5 0.78
    MA 5.4-13-S 5.4 13 7 84.6 1.5 1.36
    MA 5.4-17-S 5.4 17 7.6 103.6 1.5 1.68
    MA 5.4-21-S 5.4 21 7.6 124 1.5 2.01
    MA 6.3-12-S 6.35 12 8.7 97 1.5 2.08
    MA 6.3-17-S 6.35 17 8.7 128 1.5 2.92
    MA 6.3-21-L 6.35 21 8.7 151.5 1.6 3.33
    MA 6.3-21-S 6.35 21 8.7 153 1.5 3.57
    MA 6.8-12-I 6.8 12 8.6 87.5 4.9 2.24
    型號MX適用於比列為4:1和10:1 MX Series for Ratios 4:1 & 10:1
    MX 3.0-17-S 3 17 4.6 62.3 1 0.34
    MX 4.0-17-S 4 17 5.8 81.6 2 0.75
    MX 5.4-17-S 5.4 17 7.6 103.7 1.5 1.53

     

     

  • MC混合管

    MC混合管適用於200ML&400ML膠管

    MC and MCX Static Mixers

    MC and MCX Static Mixers

    STATOMIX MC and MCX Cartridge mixers were developed for the MIXPAC 200 and MIXPAC 400SYSTEMS. The unique element design achieves proper mixing with minimal resistance, which is highly beneficial for manually powered dispensing. In addition, the MCX version has a patented design that centers the smaller stream of catalyst in 4:1 and 10:1 formulations. The STATOMIX MC and MCX series mixers come in a wide variety of sizes and will mix virtually any 2-part material including epoxies, silicones, urethanes, acrylics and polyesters. The STATOMIX MC Cartridge mixer has an industry standard connection which allows it to be used with other large cartridge systems. For more information about the MIXPAC System, please click here.

    靜態混合管

    靜態混合管是應用先進的科學原理同精密的生產技術所製造 , 使混合同攪拌二液性材料的工序能夠自動化 , 連續化 . 擺脫傳統作業方式同解決以往因人手作業所遇到的困難及產品質量問題 , 節省工作時間 , 提高產品質量 . 靜態混合管的攪拌葉片完全根據流體力學設計 , 攪拌葉片與外管結構緊湊 . 選擇不同的攪拌葉片節數 , 可使混合同攪拌達到最佳的效果 . 靜態攪拌器末端有多種型式設計 , 例如 : 依所需的流量截取所需的出膠口徑 , 裝上轉換頭 , 可轉接各種口徑針咀以配合小膠量之要求或軟管 .

     

    Technical Data
    Outer Housing Polypropylene Elements Polypropylene
    Retaining Nuts 7/8" - 9 thread    
     
    Part No. Inner Dia. I.D. (mm) Number of Elements Outer Dia. O.D. (mm) Length L (mm) Nozzle Dia. A (mm) Approx. Content Vol (ml)
    MC Series for Ratios 1:1 & 2:1
    MC 05-18 5 18 8 121 1.5 2.1
    MC 05-24 5 24 8 149 1.5 2.3
    MC 05-32 5 32 8 188 1.5 2.8
    MC 06-18 6.35 18 10 149 1.9 3.6
    MC 06-24 6.35 24 10 185 1.9 4.2
    MC 06-32 6.35 32 10 234 1.9 6.6
    MC 08-18 8 18 12 177 2.4 6.7
    MC 08-24 8 24 12 223 2.4 8.5
    MC 08-32 8 32 12 287 2.4 11.5
    MC 10-18 10 18 14 214 3 12.3
    MC 10-24 10 24 14 276 3 14.6
    MC 10-32 10 32 14 352 3 21.8
    MC 13-12 13 12 17 170 4 15.5
    MC 13-18 13 18 17 231 4 21
    MC 13-24 13 24 17 293 4 27.3
    MC 13-32 13 32 17 379 4 35.4
    MCX Series for Ratios 4:1 & 10:1
    MCX 08-18 8 18 12 182 2.4 6.7
    MCX 08-24 8 24 12 230 2.4 8.5
    MCX 10-12 10 12 14 155 3 9.6
    MCX 10-18 10 18 14 215 3 12.3
    MCX 10-24 10 24 14 275 3 14.6
    MCX 13-12 13 12 17 192 4 15.5

    Retaining Nuts for MC and MCX Series Mixers

    Part Number Description For I.D. (mm) Thread
    UM 10-PP PP, Natural 05, 06, 08, 10 7/8" - 9 Thread
    UM 13-PP PP, Natural 13 7/8" - 9 Thread
    UM 10-14-PP PP, White 05, 06, 08, 10 7/8" - 14 thread
    UM 13-14-PP PP, White 13 7/8" - 14 thread

  • MR動態混合管

    MR Rotary Mixers - Machine

    STATOMIX MR series plastic disposable mixers are designed for use with meter, mix and dispense equipment. The MR mixer provides an inexpensive solution for the dynamic mixing of low viscosity, 2-component adhesives. In dynamic mixing, unlike that of motionless mixing, the elements within the mixer rotate. This makes the MR series ideally suited for hard-to-mix foams and urethane elastomers. Its low cost allows the entire mixer to be discarded, eliminating costly cleaning procedures associated with dynamic mixing STATOMIX MR series mixers are designed with a modifiable stepped end which allows for increased outlet diameters.

    靜態混合管

    靜態混合管是應用先進的科學原理同精密的生產技術所製造, 使混合同攪拌二液性材料的工序能夠自動化, 連續化. 擺脫傳統作業方式同解決以往因人手作業所遇到的困難及產品質量問題, 節省工作時間, 提高產品質量. 靜態混合管的攪拌葉片完全根據流體力學設計, 攪拌葉片與外管結構緊湊. 選擇不同的攪拌葉片節數, 可使混合同攪拌達到最佳的效果. 靜態攪拌器末端有多種型式設計, 例如: 依所需的流量截取所需的出膠口徑, 裝上轉換頭, 可轉接各種口徑針咀以配合小膠量之要求或軟管. MR-綠色 (接口直徑: 16.70 mm O) 請注意: 混合管應用在高粘度的二液性材料時, 為防止因壓力而膨脹所形成攪拌葉片與外管之間隙. 需使金屬保護套筒, 確保混合效果同攪拌質量.

    Technical Data
    Outer Housing Polypropylene Elements Green Polyacetal
    Retaining Method Bell mouth style (i.d 16.7mm) for Retaining Nut with 7/8" - 9 thread
     
    Part No. Inner Dia. I.D. (mm) Number of Elements Outer Dia. O.D. (mm) Length L (mm) Nozzle Dia. A (mm) Approx. Content Vol (ml)
    MR 06-12 6.4 12 10 111 1.8 n/a
    MR 08-12 8 12 12 130 2.4 n/a
    MR 10-12 10 12 14 155 3 n/a
    MR 13-12 13 12 17 197 4 n/a

     

  • MS ME混合管

    耐高壓混合管,適用於兩液型機台

    MS Static Mixers - Machine

    STATOMIX MS series plastic disposable mixers, when used with meter mix equipment, provide a low cost solution for 2-component mixing. The mixer element is molded of polyacetal to withstand the higher pressures of meter mix machines. STATOMIX MS series mixers are also available with support washers. The washer will prevent the elements from extruding out the end of the housing when working with high pressure applications. STATOMIX MS mixers are suitable for all types of meter, mix and dispensing systems. Check with our sales department for the correct mixer for your equipment.

    NOTE: The only functional difference between ME series and MS series is the inner diameter of the bell inlet housing: ME = .625 inches and MS = .657 inches

    靜態混合管

    靜態混合管是應用先進的科學原理同精密的生產技術所製造, 使混合同攪拌二液性材料的工序能夠自動化, 連續化. 擺脫傳統作業方式同解決以往因人手作業所遇到的困難及產品質量問題, 節省工作時間, 提高產品質量. 靜態混合管的攪拌葉片完全根據流體力學設計, 攪拌葉片與外管結構緊湊. 選擇不同的攪拌葉片節數, 可使混合同攪拌達到最佳的效果. 靜態攪拌器末端有多種型式設計, 例如: 依所需的流量截取所需的出膠口徑, 裝上轉換頭, 可轉接各種口徑針咀以配合小膠量之要求或軟管. ME-藍色 (接口直徑: 15.90 mm O) MS–黃色 (接口直徑: 16.70 mm O) 請注意: 混合管應用在高粘度的二液性材料時, 為防止因壓力而膨脹所形成攪拌葉片與外管之間隙. 需使金屬保護套筒, 確保混合效果同攪拌質量.

    Technical Data
    Outer Housing Polypropylene Elements Polyacetal
    Retaining Nuts 7/8" - 9 thread or 7/8" - 14 thread I.D. Bell Inlet Housing 0.657 inches
    .
    Part No. Inner Dia. I.D. (mm) Number of Elements Outer Dia. O.D. (mm) Length L (mm) Nozzle Dia. A (mm) Approx. Content Vol (ml)
    MS 05-24 5 24 8 149 1.5 2.3
    MS 05-32 5 32 8 188 1.5 2.8
    MS 06-24 6.35 24 10 185 1.9 4.2
    MS 06-32 6.35 32 10 234 1.9 6.6
    MS 06-48 6.35 48 10.5 334 2.2 10
    MS 06-56 6.35 56 10.5 378 4.5 11
    MS 08-24 8 24 12 223 2.4 8.5
    MS 08-32 8 32 12 287 2.4 11.5
    MS 10-24 10 24 14 276 3 16
    MS 10-32 10 32 14 352 3 23
    MS 1012-0832 10.00-8.00 12 + 32 14.00-12.00 409 2.4 19
    MS 13-24 13 24 17 293 4 27
    MS 13-24-L 13 24 17 350 4 27
    MS 13-32 13 32 17 379 4 34.5
    MS 13-32-L 13 32 17 451 4 34.5
    MS 1312-1032 13.00-10.00 12 + 32 17.00-14.00 499 7.2 37.5

    Retaining Nuts for MS Series Mixers

    Part Number Description For I.D. (mm) Thread
    UM 08-PA PA 6, Beige 5-8 7/8" - 9 Thread
    UM 10-PA PA 6, Beige 5-10 7/8" - 9 Thread
    UM 13-PA PA 6, Beige 13 7/8" - 9 Thread
    UM 10-14-PA PA 6, Grey 5-10 7/8" - 14 thread
    UM 13-14-PA PA 6, Grey 13 7/8" - 14 thread

  • 方形混合棒

    50ML膠管用方形混合棒

  • 金屬混合管

    Stainless mixer