MS ME混合管

 

 

MS Static Mixers - Machine

STATOMIX MS series plastic disposable mixers, when used with meter mix equipment, provide a low cost solution for 2-component mixing. The mixer element is molded of polyacetal to withstand the higher pressures of meter mix machines. STATOMIX MS series mixers are also available with support washers. The washer will prevent the elements from extruding out the end of the housing when working with high pressure applications. STATOMIX MS mixers are suitable for all types of meter, mix and dispensing systems. Check with our sales department for the correct mixer for your equipment.

NOTE: The only functional difference between ME series and MS series is the inner diameter of the bell inlet housing: ME = .625 inches and MS = .657 inches

靜態混合管

靜態混合管是應用先進的科學原理同精密的生產技術所製造, 使混合同攪拌二液性材料的工序能夠自動化, 連續化. 擺脫傳統作業方式同解決以往因人手作業所遇到的困難及產品質量問題, 節省工作時間, 提高產品質量. 靜態混合管的攪拌葉片完全根據流體力學設計, 攪拌葉片與外管結構緊湊. 選擇不同的攪拌葉片節數, 可使混合同攪拌達到最佳的效果. 靜態攪拌器末端有多種型式設計, 例如: 依所需的流量截取所需的出膠口徑, 裝上轉換頭, 可轉接各種口徑針咀以配合小膠量之要求或軟管. ME-藍色 (接口直徑: 15.90 mm O) MS–黃色 (接口直徑: 16.70 mm O) 請注意: 混合管應用在高粘度的二液性材料時, 為防止因壓力而膨脹所形成攪拌葉片與外管之間隙. 需使金屬保護套筒, 確保混合效果同攪拌質量.

Technical Data
Outer Housing Polypropylene Elements Polyacetal
Retaining Nuts 7/8" - 9 thread or 7/8" - 14 thread I.D. Bell Inlet Housing 0.657 inches
.
Part No. Inner Dia. I.D. (mm) Number of Elements Outer Dia. O.D. (mm) Length L (mm) Nozzle Dia. A (mm) Approx. Content Vol (ml)
MS 05-24 5 24 8 149 1.5 2.3
MS 05-32 5 32 8 188 1.5 2.8
MS 06-24 6.35 24 10 185 1.9 4.2
MS 06-32 6.35 32 10 234 1.9 6.6
MS 06-48 6.35 48 10.5 334 2.2 10
MS 06-56 6.35 56 10.5 378 4.5 11
MS 08-24 8 24 12 223 2.4 8.5
MS 08-32 8 32 12 287 2.4 11.5
MS 10-24 10 24 14 276 3 16
MS 10-32 10 32 14 352 3 23
MS 1012-0832 10.00-8.00 12 + 32 14.00-12.00 409 2.4 19
MS 13-24 13 24 17 293 4 27
MS 13-24-L 13 24 17 350 4 27
MS 13-32 13 32 17 379 4 34.5
MS 13-32-L 13 32 17 451 4 34.5
MS 1312-1032 13.00-10.00 12 + 32 17.00-14.00 499 7.2 37.5

Retaining Nuts for MS Series Mixers

Part Number Description For I.D. (mm) Thread
UM 08-PA PA 6, Beige 5-8 7/8" - 9 Thread
UM 10-PA PA 6, Beige 5-10 7/8" - 9 Thread
UM 13-PA PA 6, Beige 13 7/8" - 9 Thread
UM 10-14-PA PA 6, Grey 5-10 7/8" - 14 thread
UM 13-14-PA PA 6, Grey 13 7/8" - 14 thread